Summary

I clean the lint screen in the dryer after every load of laundry, just like nearly everybody else I know. But the part almost nobody cleans is the 4-inch duct that exhausts the heat and moisture from the dryer itself. Newer gas dryers shut themselves off, telling you that you need to clean the dryer vent. In older ones, a clogged exhaust could lead to a fire even though the lint screen was clean. The U.S. Fire Administration estimates that there are about 2,900 home dryer fires per year, and the main factor is lack of cleaning. The lint screen only catches part of the lint What gets past it settles in the duct The lint screen on the dryer is a coarse filter and some of the fine lint and fibers will make it past that screen. That lint will then travel in the air as it is exhausted from the dryer and get deposited in areas where that air slows down. These areas include the cavity under the lint screen, the back of the dryer and all of the elbows in the duct and the hood outside the house. I found out that my lint screen was not [catching all the lint with a 100 to 150. Fire officials recommend cleaning the dryer vent once a year, or more often if dryer cycles start taking longer. Do it before January It’s time to clean the dryer vent now. Dryer fires are more common in the fall and winter months, with a peak in January. Clean the lint screen, use the vacuum attachment to clean the lint cavity, move the dryer from the wall to clean the duct, and go outside and check the dryer vent hood. If your dryer vent is made of foil or plastic, replace it with a rigid metal duct. And if your dryer gives you a warning to clean the dryer vent, do it before your next load of laundry.

By Jonathon Jachura

Original Article